12-Tonne Hydraulic Floor Press Auto Heavy Part Repair + Accurate Oil Gauge

• 20-ton rated capacity for handling metal plates (20-35mm thick) and heavy mechanical accessories
• Air-hydraulic linkage system combines pneumatic speed with hydraulic precision
• Standard pressure gauge for real-time pressure monitoring and control
• Adjustable working range of 100-970mm for diverse workpiece sizes
• 490mm-wide worktable provides ample operating space
• Durable construction with neat air/hydraulic pipeline layout for easy maintenance

Precision press-fitting of gearbox bearings, drive axle bushings, and other components with real-time pressure monitoring to prevent damage.

Bending, flanging, and shaping of steel plates (20-35mm thick) into mechanical brackets and equipment guardrails.

Straightening and repair of deformed components in agricultural and construction machinery.

Press-fitting assembly of large hardware frames and steel structure connectors with controlled pressure application.

• Check air source connection and pressure (0.6-0.8MPa required)
• Inspect pneumatic switch functionality
• Clean or replace air inlet filter if blocked

• Ensure clean, tight contact between ram and workpiece
• Verify worktable is level using a spirit level
• Replace hydraulic oil if contaminated or degraded

• Tighten base bolts and use anti-slip pads if needed
• Lubricate ram guide rails with lithium-based grease
• Center workpiece on worktable for balanced force distribution

• Maintain proper hydraulic oil level
• Clear any hydraulic pipeline blockages
• Replace aged cylinder seal rings if necessary