4500kg Two-Post Lift: 1855mm Height, Rubber Guards+Single-Lock for Heavy SUV/Truck Repair
Product Details
| Product Name: | YD07-008 Two-Post Car Lift | Maximum Lifting Weight: | 4500 Kg (9900 Lb) |
|---|---|---|---|
| Lifting Height Range: | Maximum: 1855 Mm (73.03") Minimum: 100 Mm (3.93") | Overall Dimensions: | Height: 3900 Mm (153.54") Width: 3617 Mm (142.4") |
| Limit & Protection: | Limit Switch Height: 3775 Mm (148.62") | Support Arm Parameters: | Three-stage Arm: 620-1160 Mm (24.4-45.67") Two-stage Arm: 910-1360 Mm (35.82-53.54") |
| Highlight |
4500kg two-post car lift,heavy-duty truck lift with rubber guards,SUV repair lift with single-lock |
||
Product Description
| Parameter Category | Specific Value |
|---|---|
| Product Name | YD07-008 Two-Post Car Lift |
| Model | YD07-008 |
| Maximum Lifting Weight | 4500 kg (9900 lb) |
| Lifting Height Range | Maximum: 1855 mm (73.03") Minimum: 100 mm (3.93") |
| Overall Dimensions | Height: 3900 mm (153.54") Width: 3617 mm (142.4") Column Inner Width: 3000 mm (118.11") Drive-through Width: 2712 mm (106.77") |
| Limit & Protection | Limit Switch Height: 3775 mm (148.62") Emergency Stop Switch: Equipped Rubber Door Guards: Equipped |
| Support Arm Parameters | Three-stage Arm: 620-1160 mm (24.4-45.67") Two-stage Arm: 910-1360 mm (35.82-53.54") |
| Power Configuration | Motor Power: 2.2 kW Power Supply: 220V/380V, 50 Hz Driving Method: Dual hydraulic cylinders |
| Surface Treatment | Powder coating, wear-resistant and corrosion-resistant |
| Packaging & Loading | 24 pcs per 40' Container |
| Applicable Vehicles | Heavy-duty SUVs, light-duty trucks, medium-to-large sedans (weight ≤ 4500 kg) |
- 4500 kg Ultra-High Load Capacity: Constructed from Q355 low-carbon alloy steel with 16mm thick columns and reinforced base plates for stable support of heavy vehicles.
- Comprehensive Vehicle Protection: 300mm rubber door guards (15mm thick EPDM rubber) and overhead emergency stop switch prevent damage to vehicles.
- Efficient Single-Point Operation: Mechanical lock release allows simultaneous unlocking from one side, improving efficiency by 50% with ergonomic handle design.
- Durable Powder Coating: 120μm epoxy resin coating withstands corrosive substances and maintains appearance with 80% better scratch resistance than standard paint.
- Wide Vehicle Compatibility: Adjustable arms (620-1360mm range) and 3000mm column width accommodate 98% of medium-heavy vehicles.
Ideal for servicing light-duty trucks up to 4000kg with 1855mm lifting height for comfortable technician access and 50% faster operation with single-point unlocking.
Perfect for precision maintenance of luxury sedans with powder-coated surfaces that resist oil stains and emergency stop protection for delicate components.
Enables rapid 25-minute response for heavy SUV rescues with 100mm minimum height access and 2712mm drive-through width for direct vehicle positioning.
Optimized for bulk servicing with 24 units per container shipment and reinforced base plates that prevent floor damage in high-volume workshops.
A: Yes, the 3900mm total height leaves adequate 300mm clearance and can be positioned to avoid overhead beams without structural modifications.
A: Simply remove the fixing buckles with a screwdriver (5-minute process per guard) - replacement guards are included with the equipment.
A: Requires ≥1200 kg/㎡ load capacity (recommended 250mm C30 concrete) and ≤5mm flatness error, adjustable via column base bolts.
A: Typically caused by hydraulic system issues - check/replace oil (18L of 32# anti-wear), clean filter, and tighten connections to restore performance.
Product Highlights
YD07-008 Two-Post Car Lift - 4500kg Capacity with Rubber Guards & Single-Lock Mechanism Product Specifications Parameter Category Specific Value Product Name YD07-008 Two-Post Car Lift Model YD07-008 Maximum Lifting Weight 4500 kg (9900 lb) Lifting Height Range Maximum: 1855 mm (73.03")Minimum: 100 ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
