YD12-008 Lightweight Manual Pipe Bender (with 7 Dies)
A portable pipe bending solution for home decoration, auto repair, agriculture, and DIY projects. Features 7 dies, 17.5kg lightweight design, and pure manual operation.
Product Specifications
| Parameter Category |
Specific Value |
| Product Name |
YD12-008 Lightweight Manual Pipe Bender (with 7 Dies) |
| Model No. |
YD12-008 |
| Core Performance |
- Pipe Bending Capacity: Suitable for mild steel
- Die Configuration: 7 sets of round dies (1"-3")
- Operation Mode: Pure manual operation
- Portability: Net weight only 17.5kg
|
| Applicable Materials & Dimensions |
- Material: Mild Steel
- Diameter Range: 1"-3"
- Wall Thickness Limit: 5/16" max for 1-1/4" pipes
|
| Dimension & Weight Parameters |
- Net Weight: 17.5kg
- Gross Weight: 18.5kg
- Package Size: 700*280*130mm
|
Key Features
- 7 dies covering 1"-3" pipe diameters
- Ultra-light 17.5kg design for easy portability
- Pure manual operation - no electricity/gas required
- Compact size for easy storage and transport
- 0°-180° angle dial for precise bending
Product Details
7 Dies for Full Coverage
Equipped with 7 sets of round dies covering 1"-3" common diameters. Dies feature snap-on design for quick change (20 seconds) and precise bending with ±0.15mm accuracy.
17.5kg Ultra-Lightweight
Easy to carry and transport, fitting in car trunks or toolboxes. Compact size (650*250*110mm) allows storage in small spaces.
Pure Manual Operation
No external power required, suitable for outdoor/remote locations. 350mm handle provides leverage for comfortable operation (≤45N force).
Simple Installation & Safety
Mounting holes for workbench fixation. Pipe limit buckle prevents deviation during bending for safe operation.
Application Scenarios
- Outdoor home decoration water and electricity transformation
- Small auto repair shops repairing exhaust pipes
- Agricultural machinery repair points making U-bolts
- Home DIY metal component making
Frequently Asked Questions
Q1: Can this equipment bend stainless steel pipes or copper pipes?
A1: Not recommended for stainless steel. Thin-walled copper pipes (≤3mm) can be bent with caution at reduced speed (≤3mm/s).
Q2: Will long-term one-hand lifting damage the equipment?
A2: Lift using dedicated handles on the body frame, not the operating handle. For long distances, use a trolley.
Q3: "Incomplete bending angle" occurs with 3" pipes. Why?
A3: Check pipe wall thickness (≤1/4"), die installation, and press slowly and steadily.
Q4: How to calibrate the angle dial after it becomes blurred?
A4: Use a square to realign the 90° mark, then test-bend a short pipe to verify accuracy.
Your message must be between 20-3,000 characters!
