2.5Ton Hydraulic Jack: 85mm Low Height, 360° Saddle for Cars/SUVs/Light Trucks
Product Details
| Product Type: | Manual Hydraulic Jack For Light To Medium Loads, Designed For Vehicle Lifting And Equipment Support | Rated Weight Capacity: | 5,500LB (2,500KGS/2.5Ton) - Suitable For Family Cars, Small SUVs, And Light Trucks |
|---|---|---|---|
| Height Parameters: | Min Height: 3.34" (85mm) | Max Height: 14.56" (370mm) | Dimension Specifications: | Product: 23.2"×9.6"×6" (590×240×150mm) | Shipping: 23.6"×10"×6" (600×260×150mm) |
| Weight Parameters: | Product: 28.6LB (13kg) | Shipping: 31LB (14kg) | Core Configuration: | High-strength Steel Frame, 360° Swivel Saddle, Sealed Hydraulic System, Safety Overload Protection |
| Highlight |
2.5Ton hydraulic jack for cars,low height hydraulic jack 85mm,360° saddle hydraulic jack SUVs |
||
Product Description
| Parameter Category | Specific Description |
|---|---|
| Model No. | YD19-001 |
| Product Type | Manual hydraulic jack for light to medium loads, designed for vehicle lifting and equipment support |
| Rated Weight Capacity | 5,500LB (2,500KGS/2.5Ton) - suitable for family cars, small SUVs, and light trucks |
| Height Parameters | Min Height: 3.34" (85mm) | Max Height: 14.56" (370mm) |
| Dimension Specifications | Product: 23.2"*9.6"*6" (590*240*150mm) | Shipping: 23.6"*10"*6" (600*260*150mm) |
| Weight Parameters | Product: 28.6LB (13kg) | Shipping: 31LB (14kg) |
| Core Configuration | High-strength steel frame, 360° swivel saddle, sealed hydraulic system, safety overload protection |
| Material & Protection | Heavy gauge steel frame (≥800MPa), sealed hydraulic system, anti-rust electrostatic spray coating |
| Applicable Scope | Family cars (Toyota Corolla, Volkswagen Lavida), small SUVs (Haval H2), light trucks (Wuling Hongguang PLUS) |
- Specifically designed for low-chassis vehicles (sports cars, sedans) with no need for additional gaskets
- 80% better adaptation rate for low-profile vehicles compared to standard 120mm+ jacks
- Eliminates risk of chassis scratching during insertion
- High-Strength Steel Frame: 5Ton load capacity (2* rated load) with widened 9.6" base
- 360° Swivel Saddle: Adjusts to vehicle chassis angle with anti-slip patterns (70% better grip)
- Overload Protection: Automatic cutoff at 110% of rated capacity (2.75Ton)
- Fully sealed hydraulic system prevents dust/water ingress (maintenance-free)
- Tested for 500+ lifts without leakage or jamming
- Anti-rust coating passes 120-hour salt spray test (1.5* longer lifespan)
- Only 13kg (28.6LB) - 30% lighter than comparable 2.5Ton jacks
- Compact 590*240*150mm size fits standard car trunk compartments
- 25-30 handle presses required for full lift (85mm to 370mm)
For Toyota Corolla (1.8Ton, 140mm chassis): 85mm height fits easily, 360° saddle prevents chassis scratches, completes tire change in 15 minutes.
For Haval H2 (1.6Ton): Sealed hydraulic system withstands water spray, stable at 300mm lift height for 20-minute cleaning.
For BMW 3 Series (1.7Ton): 85mm low profile fits without pads, 350mm lift provides ample workspace for waxing.
For 1.5Ton seeders (100mm chassis): Dust-resistant design works in field conditions, stable on uneven ground.
No - Overload protection activates at 2.75Ton. Use a 3Ton+ jack for heavier loads.
No - Damping mechanism and chassis pressure lock it in place after adjustment.
Likely due to cold temperatures (let warm up) or seal adhesion (press handle firmly 5-10 times).
- Use knee lift technique (not back bending)
- Slide short distances when possible
- Use trunk anti-slip mat for storage
Product Highlights
2.5Ton Hydraulic Jack: 85mm Low Height, 360° Saddle for Cars/SUVs/Light Trucks Product Specifications Parameter Category Specific Description Model No. YD19-001 Product Type Manual hydraulic jack for light to medium loads, designed for vehicle lifting and equipment support Rated Weight Capacity 5...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
