3Ton Low Profile Jack: 76mm Min Ht, Fast-Lowering Handle for Sports Cars/Low-Chassis Vehicles
Product Details
| Model No.: | YD19-003 | Product Type: | Low Profile Steel Hydraulic Floor Jack, Specially Designed For Low-chassis Vehicles, Mainly Used For Lifting Sports Cars, Performance Sedans, And Modified Cars, Suitable For Individual Car Owners, Auto Beauty Shops, And Professional Auto Repair Shops |
|---|---|---|---|
| Rated Weight Capacity: | 6,600LB (3,000KGS/3Ton), | Height Parameters: | Min Height: 2.95” (76mm), Max Height: 19.8” (503mm), |
| Dimensions & Weight: | Product Dimensions: 27.5"×13"×6.25” (698×330×158mm), | Core Configuration: | 76mm Ultra-Low Base |
| Highlight |
3Ton low profile jack,low profile jack for sports cars,fast-lowering handle car jack |
||
Product Description
| Parameter Category | Specific Description |
|---|---|
| Model No. | YD19-003 |
| Product Type | Low profile steel hydraulic floor jack, specially designed for low-chassis vehicles |
| Rated Weight Capacity | 6,600LB (3,000KGS/3Ton), with overload protection threshold of 3.3Ton |
| Height Parameters | Min Height: 2.95" (76mm), Max Height: 19.8" (503mm) |
| Dimensions & Weight | Product Dimensions: 27.5"×13"×6.25" (698×330×158mm), Weight: 79.2LBS (36kg) |
| Core Configuration |
|
| Applicable Scope | Supercars (Porsche 718, BMW Z4), performance sedans (Audi S3, Mercedes-AMG A45), low-chassis modified cars, and family cars |
The YD19-003 3Ton Low Profile Steel Hydraulic Floor Jack is designed to address the challenges of lifting low-chassis vehicles with its ultra-low adaptation, safe vehicle protection, and efficient operation.
The base is integrally stamped from 10mm thick high-strength cold-rolled steel, with a minimum height of only 76mm—30% thinner than ordinary 3Ton floor jacks. Key features:
- Easily slides under supercars like Porsche 718 (chassis height 120mm) without removing chassis guards
- Adapts to modified sedans with chassis lowered to 50-80mm with 90% better adaptation than ordinary jacks
- Bottom has anti-slip patterns with friction coefficient ≥0.7 to prevent sliding under 3Ton load
- Foam-Buffered Twist Handle: 30mm thick high-density foam bumper prevents panel damage
- Rubber Saddle: 5mm thick oil-resistant rubber layer protects chassis coating
- Stable Structure: 120mm saddle diameter provides 87.5% larger contact area than standard jacks
- Fast-Lowering Design: Lowers from 503mm to 76mm in just 15 seconds (90% faster than standard jacks)
- Sealed Hydraulic System: Double sealing rings prevent dust and water intrusion
- Low-Temperature Operation: Works normally in temperatures as low as -10℃
Scenario: Porsche 718 (chassis height 120mm, weight 1.5Ton) flat tire on mountain road.
Process:
- 76mm ultra-low base slides under vehicle from side skirt
- Lifts tire 8cm off ground with rubber saddle protecting chassis
- Fast lowering completes in 15 seconds with no vehicle scratches
Result: 60% more efficient than traditional emergency jacks.
Scenario: Audi S3 (chassis height 130mm, weight 1.6Ton) deep chassis cleaning.
Process:
- 76mm base slides under chassis with rubber saddle alignment
- Sealed hydraulic system prevents water intrusion during cleaning
- No shaking or chassis damage during 30-minute process
A1: Not recommended due to scratching risks. For vehicles ≤70mm, raise suspension first or use professional racing-grade jack with ≤60mm height.
A2: Immediately stop using and replace. Contact manufacturer for replacement rubber layer (30-50 yuan/piece). Temporary solution: use 3mm thick rubber pad.
A3: Yes for short distances. Tips: use hidden metal handles, slide on ground for ≤10m distances, or use storage rack.
A4: Possible causes/solutions:
- Replace hydraulic oil if idle >6 months
- Lubricate seals by pressing handle (≤80N force)
- Clean impurities with compressed air or alcohol
Recommend lifting jack once every 3 months to prevent issues.
Product Highlights
3Ton Low Profile Jack: 76mm Min Ht, Fast-Lowering Handle for Sports Cars/Low-Chassis Vehicles Product Specifications Parameter Category Specific Description Model No. YD19-003 Product Type Low profile steel hydraulic floor jack, specially designed for low-chassis vehicles Rated Weight Capacity 6...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
