YD27-001 Steel Tool Box: 5 Trays, 3kg, Oil-Resistant for Garage/DIY/Camping
Product Specifications
| Parameter Category |
Specific Description |
| Model |
YD27-001 (Steel Mechanic-Specific Tool Box) |
| Product Positioning |
Portable multi-layer storage tool box designed for automotive repair scenarios, serving auto repair shop technicians, car enthusiasts, and small repair workshops |
| Dimension Parameters |
37cm*16cm*16cm (14.6inch*6.3inch*6.3inch), internal storage space of approximately 9.47L |
| Weight & Load-Bearing |
Net weight: 3kg (6.6pounds). Each tray rated for 2kg, total capacity 10kg |
| Material & Craftsmanship |
High-quality cold-rolled steel plate (0.8mm thick) with powder coating (60μm thickness) |
| Core Configuration |
5 removable trays, full-length steel handle, closing lock on both sides |
General Adaptability
| General Parameter |
Specific Description |
| Tool Adaptation Range |
Suitable for most small and medium-sized automotive repair tools |
| Usage Environment |
Operates in -20℃ to 60℃, resistant to humid and oily conditions |
Product Highlights
Powder Coating + Cold-Rolled Steel Plate, Durable and Wear-Resistant
- Chemical Corrosion Resistance: Resists engine oil, transmission oil, and brake fluid. Service life ≥5 years
- Impact and Scratch Resistance: 0.8mm steel structure withstands collisions without denting
5-Layer Classified Storage, Doubling Tool Management Efficiency
- Classified Storage: 5 layers organized by tool function/repair process
- Removable Trays: Adjustable compartments adapt to different tool sizes
3kg Lightweight + Full-Steel Handle, Full Portability
- One-Hand Carrying: Easy movement between workstations
- Secure Locking: Buckle structures prevent tray sliding during transport
Application Scenarios
Daily Repair in Auto Repair Shops
5-layer storage + oil-resistant design increases repair efficiency by 50% and reduces tool loss by 90% compared to traditional tool bags
DIY Maintenance by Car Enthusiasts
Portable and durable solution for home garage organization and outdoor emergency repairs
Parts Storage in Small Repair Workshops
Integrated tool and parts storage increases carrying convenience by 80% compared to separate containers
Frequently Asked Questions
Q1: Can the handle support 13kg total weight (3kg box + 10kg tools)?
A1: Yes, the full-steel handle is welded and tested to 22.5kg with no deformation or looseness.
Q2: How to clean oil spills on the box?
A2: Wipe with dry rag, clean with diluted neutral detergent, then dry. The coating resists chemical corrosion.
Q3: What if trays are difficult to pull out?
A3: Clean tracks, apply lithium-based grease, and check for minor deformations that can be corrected with pliers.
Q4: What happens if dropped from 1.5m?
A4: The steel construction prevents major damage, and locking buckles keep tools secure inside.
Your message must be between 20-3,000 characters!
