YEEDA YD57-006 Ball Joint Tool:15-60mm,Carbon Steel,Chrome-Plated,for Shops/Teams/Dealerships
Product Details
| Highlight |
Ball joint tool for motorcycle shops,Carbon steel ball joint tool,Chrome-plated ball joint tool |
||
|---|---|---|---|
Product Description
Professional-grade 15-60mm ball joint separator tool made from carbon steel with chrome-plated finish, ideal for automotive shops, service teams, and dealerships.
| Parameter Category | Specific Specification |
|---|---|
| Model No. | YD57-006 (Specialized Ball Joint Separator Tool for Automotive Maintenance) |
| Material | Carbon Steel (high tensile strength, suitable for applying torque to tight ball joints) |
| Surface Treatment | Chrome Plated (anti-rust, corrosion-resistant to automotive grease, road salt, and workshop humidity) |
| Molding Processing | Drop Forged (eliminates internal defects, enhances structural density and durability) |
| Packaging | Blow mold case (custom-fitted for secure storage; prevents tool scratches/damage during transport) |
| Target Compatibility | Passenger cars, small SUVs, and light trucks (front-wheel-drive and all-wheel-drive models with standard-sized ball joints) |
| Estimated Size Range | 15-60mm (fits most common automotive ball joint diameters) |
| Estimated Weight | 1.0-1.3 kg (lightweight for single-hand operation; balanced for steady torque application) |
| Test Item | Test Condition | Test Result |
|---|---|---|
| Torque Resistance | Apply 25 N*m torque repeatedly for 80 cycles | No bending, cracking, or deformation of the tool body |
| Corrosion Resistance | Immerse in 5% saltwater solution for 24 hours | No rust formation on chrome-plated surface |
| Wear Resistance | Remove 50 standard ball joints (15-60mm) | Minimal wear on contact points; chrome plating stays intact |
| Storage Durability | Store in blow mold case under 60% humidity for 3 months | No moisture buildup; tool remains clean and rust-free |
- Superior Durability: Drop forging compresses carbon steel into a dense structure, making the tool 40% stronger than cast steel alternatives.
- Balanced Hardness: HRC 35-40 hardness provides optimal wear resistance and ductility, supporting 200+ removal cycles.
- Anti-Corrosion Shield: Chrome plating repels automotive grease, road salt, and moisture, extending service life by 50%.
- Easy Cleaning: Grease and dirt wipe off easily with a dry cloth, saving time during repairs.
- Secure Transport: Custom-fitted case prevents movement and scratches during transit.
- Space-Saving Design: Compact case (30×15×6 cm) fits easily on shelves or in service vans.
Ideal for shops servicing 18+ passenger cars monthly with 20-45mm ball joints:
- Retrieve tool from case and position jaw around ball joint
- Apply steady torque - carbon steel handles force without bending
- Complete 18 cars in ~27 minutes with reduced technician fatigue
- Clean with dry cloth and store in case after use
Perfect for teams handling 10+ small SUVs weekly in outdoor conditions:
- Secure tool in blow mold case during transport
- Chrome plating resists dust and road grime during on-site use
- Withstands accidental drops on pavement without damage
- Lightweight case easy to carry to vehicle
Slippage is typically due to grease buildup or incorrect positioning:
- Clean the ball joint and tool's jaw with degreasing cloth
- Ensure jaw fully encloses ball joint's base
- Apply slow, consistent pressure
No. The tool is designed for standard ball joint sizes (15-60mm). Using it on larger joints may cause:
- Incomplete grip leading to slippage
- Excess stress on carbon steel
- Extended repair time
Chipped plating is usually caused by impact damage or improper cleaning:
- Avoid dropping tool on hard surfaces
- Use soft cloth and mild soap for cleaning
- Dry immediately after cleaning
Product Highlights
YEEDA YD57-006 Ball Joint Tool Professional-grade 15-60mm ball joint separator tool made from carbon steel with chrome-plated finish, ideal for automotive shops, service teams, and dealerships. Product Specifications Core Parameters Parameter Category Specific Specification Model No. YD57-006 ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
