Straight Steel Ramps: 1600LBS/Pair, 183cm, Galvanized for Logistics/Construction
Product Details
| Load-Bearing Capacity: | Single Unit 800 Lbs (363kg), Paired 1600 Lbs (726kg) | Dimensions:: | 183cm (72") Length × 30cm (12") Width |
|---|---|---|---|
| Material:: | Galvanized Stamped Steel (8μm Coating) With Raised Anti-slip Rungs | Durability: | 1.2× Load Test (1920 Lbs) For 1 Hour Without Bending |
| Net Weight: | 20.5kg/pair (10.25kg Per Unit) | Packaging: | 1 Pair/carton (182×32×12cm) |
| Highlight |
steel motorcycle ramps 1600LBS capacity,galvanized steel ramps for construction,183cm motorcycle lift bench ramps |
||
Product Description
| Parameter Category | Specific Description |
|---|---|
| Model | YD25-002 |
| Product Type | Straight steel ramps for loading/unloading medium-heavy wheeled equipment (small trucks, engineering carts, large ATVs). Ideal for logistics stations, construction sites, outdoor camps, and agricultural operations. |
| Core Performance Parameters |
|
| Weight & Packaging |
|
- Enhanced Load Capacity: 33% stronger than standard ramps (1200 lbs → 1600 lbs)
- Galvanized Construction: Passes 72-hour salt spray test with no rust
- Straight Design: No folding joints for maximum rigidity and safety
- Anti-Slip Rungs: 5mm raised profile improves traction by 50% vs flat ramps
- Space-Saving Storage: Upright (0.038m²) or stacked (3 pairs ≤40cm) options
Efficiently load 1400 lbs cargo carts onto 80cm-high trucks. Complete 15+ daily cycles with 2-person handling, reducing labor costs by 50% versus manual lifting.
Stable performance on gravel surfaces for 1200 lbs concrete carts. Eliminates forklift rental costs ($300/day savings) with 1.5-minute loading cycles.
Humidity-resistant solution for 1000 lbs ATVs. 32% lighter than cast iron ramps, enabling quick 30-second transfers between trailers and ground.
Mud-adaptive design handles 1500 lbs seeders. Saves 4 laborers versus manual methods while preventing chassis ground contact.
Not recommended. Exceeding the 1600LBS rating risks permanent deformation and safety hazards. For 1700LBS+ equipment, use 2000LBS+ rated ramps.
- Sand rusted areas with 800-grit paper
- Apply epoxy zinc yellow primer (2 thin coats)
- Rinse after use and store upright in dry conditions
- Use reinforced handles at center of gravity
- For 100m+ distances, use a folding cart
- Secure in trucks with rope tie-downs
- Place on 40*30cm steel/plastic plates
- Use 50cm ground stakes for deep mud
- Pre-level ground when possible
Product Highlights
YD25-002 Straight Steel Ramps: 1600LBS/Pair, 183cm, Galvanized for Logistics/Construction Product Specifications Parameter Category Specific Description Model YD25-002 Product Type Straight steel ramps for loading/unloading medium-heavy wheeled equipment (small trucks, engineering carts, large ATVs)...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
