YD25-004 Tri-Fold Motorcycle/ATV Loading Ramp
Heavy-duty 1500LBS capacity tri-fold ramp with 69"*45" unfolded dimensions, featuring anti-slip surface and side baffles for safe loading of motorcycles, ATVs, snowmobiles and other small to medium wheeled equipment.
Product Specifications
| Parameter Category |
Specific Description |
| Model |
YD25-004 |
| Product Type |
Tri-fold loading ramp for motorcycles, ATVs, lawnmowers, and snowmobiles. Ideal for motorcycle stores, outdoor camps, home garages, and snow operations. |
| Core Performance Parameters |
- Load-Bearing Capacity: 1500 lbs (680kg) per set, made of 2.5mm thick aviation-grade aluminum alloy
- Dimensions: Unfolded 69"*45" (175.3cm*114.3cm), folded 69"*15.5" (175.3cm*39.4cm)
- Safety Features: Diamond anti-slip texture (friction coefficient ≥0.85), 5cm side baffles
|
| Weight & Packaging |
12kg per ramp (24kg per set), packaged in 177*16*41cm carton (0.114m³ volume) |
| Durability & Advantages |
- 40% lighter than steel ramps
- Anodized surface resists rust and corrosion
- Meets mechanical safety standards with ≥5 year service life
|
Key Features
1. 45-Inch Width + 1500LBS Load-Bearing Capacity
Wide 45-inch design accommodates wheelbases from 90-160cm, supporting heavy cruising motorcycles and large ATVs without angle adjustments. Aviation-grade aluminum construction provides stable support for equipment up to 1500 lbs, including accessories.
2. Tri-Fold Storage + Lightweight Portability
Folds to just 15.5 inches wide (66% space saving) for easy storage in garages or vehicle trunks. At only 12kg per ramp with ergonomic handle, one person can easily transport and position.
3. Anti-Slip Texture + Safety Baffles
Diamond-pattern surface maintains grip in wet/snowy conditions (friction coefficient ≥0.85). 5cm side baffles prevent equipment deviation during loading, reducing rollover risk by 95% compared to unbaffled ramps.
Application Scenarios
Motorcycle Stores
Efficiently load/unload 8-10 motorcycles daily (800-1200 lbs). Wide width adapts to all models while folded storage saves showroom space. Increases customer satisfaction by 25% by preventing adaptation-related collisions.
Outdoor Camps
Quickly load 1000-lb ATVs onto trailers in humid conditions. Aluminum construction resists moisture while lightweight design (33% lighter than steel) improves transport efficiency.
Home Garages
Single-person operation for storing 900-lb motorcycles in tight spaces (10m²). Folded ramps occupy just 0.069m² when stored vertically in corners.
Snow Operations
Reliably load 1300-lb snowmobiles in slippery conditions. Rust-resistant aluminum withstands snow salt, while anti-slip texture prevents sliding. Saves 4 laborers compared to manual lifting.
Frequently Asked Questions
Q1: Can this ramp handle a 1600LBS tractor?
Not recommended. Exceeding the 1500LBS limit risks permanent deformation or breakage, potentially damaging equipment and injuring operators. Use 2000LBS+ ramps for heavier loads.
Q2: How to restore worn anti-slip texture?
Clean surface thoroughly, apply outdoor polyurethane anti-slip paint (0.5mm thickness), and allow 6+ hours drying. Regular cleaning and annual inspections maintain performance.
Q3: Can women carry these ramps alone?
Yes, using proper technique: Hold handle at center of gravity, use body momentum, and switch arms every 20m. For distances over 50m, use a folding cart to reduce effort by 80%.
Q4: How to prevent sinking in deep snow?
Place anti-slip rubber plates (40*30cm) under ramp ends, use 40cm ground nails for fixation, or clear snow to expose hard ground before placement.
Your message must be between 20-3,000 characters!
