ATV Folding Ramp: 1500LBS/Pair, 226cm, Perforated Anti-Slip for Off-Road/Beach
Product Details
| Load-Bearing Capacity: | 750 Lbs Per Piece (340kg), 1500 Lbs Per Pair (680kg) | Material: | 2.8mm Thick High-strength Cold-rolled Steel |
|---|---|---|---|
| Dimensions: | 226cm (89") Unfolded Length, 31cm (12") Single Runner Width | Folding Design: | Reduces To 117cm (46"), Saving 48% Storage Space |
| Safety Features: | Perforated Anti-slip Surface (1cm Holes), 2m Safety Straps With S-hooks (500 Lbs Capacity) | Weight & Packaging: | 7.2kg Per Piece, 14.4kg Per Pair Packaged In 117×28×31cm Carton (0.103m³ Volume) |
| Highlight |
ATV folding ramp with anti-slip,heavy-duty ATV ramp 1500LBS,perforated ATV ramp for off-road |
||
Product Description
Heavy-duty folding ramp designed for ATVs, UTVs, and small off-road vehicles with 1500LBS/pair capacity, 226cm length, and perforated anti-slip surface for superior outdoor performance.
| Parameter Category | Specific Description |
|---|---|
| Model | YD25-005 |
| Product Type | ATV Folding Dual Runner Ramp for outdoor wheeled equipment including ATVs, UTVs, and small electric off-road vehicles |
| Core Performance Parameters |
|
| Weight & Packaging |
|
| Durability & Advantages |
|
- Dual-function surface: 1cm diameter holes provide both anti-slip (friction coefficient ≥0.8) and drainage capabilities
- Safety straps: 2m long, 500 lbs capacity straps with S-hooks prevent ramp displacement during loading
- 226cm length: Creates low 25° climbing angle for easier loading
- 31cm width: 24% wider than standard ramps for better stability
- Adjustable spacing: Accommodates wheelbases from 90-130cm
- 7.2kg per piece: Easy single-person operation with anti-slip handle
- Folding design: Reduces to 117cm length for compact storage
Perfect for solo off-road enthusiasts needing to load 1000 lbs ATVs onto trailers (85cm high) on gravel terrain. The anti-slip perforated surface and safety straps enable secure one-person operation.
Ideal for farmers loading 1300 lbs UTVs onto tractor trailers (90cm high) in muddy conditions. The drainage holes prevent water accumulation while the wide runners provide stability.
Excellent for beach camps transferring 900 lbs ATVs to beach vehicles (75cm high). Sand falls through the holes, keeping the surface clean and dry for repeated use.
Essential for rescue teams needing to quickly load 1100 lbs ATVs onto rescue vehicles (80cm high) on varied terrain. The lightweight design enables rapid deployment.
Not recommended. The 1500LBS rated capacity would be exceeded, risking permanent deformation or breakage. Use 2000LBS+ ramps for heavier equipment.
- Rinse with medium-pressure water gun
- Use wooden stick (≤0.8cm diameter) to clear stubborn sand
- Apply outdoor anti-rust agent every 3 months
- Use proper one-hand carrying technique with anti-slip handle
- For distances over 100m, use wheeled gear bag
- Slide ramp on flat ground when possible
- Place rubber anti-slip mats under ramp
- Install 40cm metal ground nails for stability
- Use sandbags or rocks as counterweights
Product Highlights
YD25-005 ATV Folding Dual Runner Ramp Heavy-duty folding ramp designed for ATVs, UTVs, and small off-road vehicles with 1500LBS/pair capacity, 226cm length, and perforated anti-slip surface for superior outdoor performance. Product Specifications Parameter Category Specific Description Model YD25...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
