PRO Touch-Up HVLP Gun: 0.5/0.8/1.0mm Nozzles, 29PSI, 125mL Cup for Auto/Electronics/Models

Designed for high-precision touch-up scenarios, the YD32-004 PRO HVLP spray gun delivers ultra-fine atomization with three nozzle sizes (0.5mm, 0.8mm, 1.0mm) and 29PSI ultra-low pressure operation. Ideal for automotive 4S shops, electronic device repair, and model detailing.

• 0.5mm nozzle for micro-scratches (≤15μm particles)
• 0.8mm nozzle for standard touch-up (5-8cm spray width)
• 1.0mm nozzle for small-area primer application
• Nano-ceramic construction (HRC85+ hardness) for durability

• 29PSI operation minimizes paint mist diffusion
• Built-in micro pressure regulator (±0.2PSi accuracy)
• 85%+ paint transfer efficiency (vs 50% industry standard)

• 280g lightweight body reduces operator fatigue
• 125mL cup minimizes paint waste for small jobs
• Anti-static, solvent-resistant construction

Repair clear coat scratches (0.05mm depth) with 0.5mm nozzle and 29PSI pressure. Achieve ≤ΔE1.0 color match with original paint.

Touch-up mobile phone frames and laptop shells using 0.8mm nozzle. Matte finish matches original texture perfectly.

Restore 1/24 scale model textures with 0.5mm nozzle. Precise control maintains fine details without blurring.

A: Reduce pressure to 27-28PSi, maintain 5-6cm nozzle distance, and use spot spraying technique.

A: Use series connector for two cups (250mL total) or pre-measure paint for medium jobs.

A: Filter paint through 300-mesh sieve, clean nozzle every 10 minutes, and use included 0.3mm needle for unclogging.