Economical Spray Gun: 1.3/1.5/1.8mm Nozzles, 50PSI, 600mL Cup for Renovation/Auto/DIY

An affordable, versatile spray gun with multiple nozzle sizes (1.3mm/1.5mm/1.8mm) designed for renovation, automotive, and DIY applications. Features 50PSI working pressure and 600mL capacity cup for efficient operation.

• Gun Body: High-quality aluminum alloy (820g) with anodized surface for rust and wear resistance
• Fluid Nozzle: H59 environmental brass material with precision of ±0.02mm
• Cup Assembly: High-transparency PC cup (impact-resistant, solvent-resistant), 600mL capacity
• Pneumatic System: Built-in basic pressure regulating valve (precision ±2 PSi)

• 1.3mm Precision Nozzle: For low-viscosity clear coat and water-based wall paint (particles ≤40μm)
• 1.5mm Regular Nozzle: For medium-to-low viscosity coatings (efficiency 10-12㎡/hour)
• 1.8mm Industrial Nozzle: For medium-viscosity coatings (spraying thickness 25-35μm)

• Compatible with most air compressors (≥0.25m³/min displacement)
• Basic pressure regulation for quick start (range 45-55 PSi)
• 30% more efficient than low-pressure spray guns (≤40PSI)

• Reduces refueling frequency by 50% compared to 300mL cups
• High-transparency design for real-time paint level monitoring
• Lightweight aluminum alloy body (820g) for comfortable extended use

• Ideal for water-based wall paint (1.3mm nozzle)
• 600mL capacity covers approximately 12-15㎡ per fill
• 65% paint utilization rate (higher than industry average)

• 1.8mm nozzle for epoxy primer
• 1.5mm nozzle for acrylic topcoat
• Professional results at 1/3 the cost of specialized auto spray guns

• Beginner-friendly operation
• Compact size for easy storage
• Quick cleaning (2 minutes with appropriate solvent)

A: Typically caused by over-diluted paint or slow moving speed. Adjust viscosity to 15-18s and maintain 30-40cm/s spraying speed.

A: Features better atomization (≤50μm vs ＞80μm), durable materials (aluminum/brass vs plastic/zinc), and higher paint utilization (65% vs 40-50%).

A: Suitable for small-area emergencies with intermittent spraying. For large areas, ≥0.25m³/min is recommended.