Sandblast Gun: 6mm Tungsten Nozzle, 80-120PSI, 500mL Hopper for Rust Removal/Texturing
Product Details
| Product Type: | Universal Pneumatic Sandblast Gun (dry Sandblasting Operations) | Working Air Pressure: | 80-120 PSi (5.52-8.27 Bar, Adjustable) |
|---|---|---|---|
| Max Air Pressure: | ≤150 PSi (10.34 Bar, Automatic Pressure Relief) | Sandblast Nozzle Diameter: | 6mm (tungsten Steel Material) |
| Abrasive Capacity: | 500 ML (high-transparency PC Hopper) | Feed Type: | Pressure-fed (uniform Sandblasting Without Interruption) |
| Highlight |
sandblast gun with tungsten nozzle,80-120PSI sandblast gun,sandblast gun for rust removal |
||
Product Description
| Parameter Category | Specific Specification |
|---|---|
| Model No. | YD32-010 |
| Product Type | Universal Pneumatic Sandblast Gun (dry sandblasting operations) |
| Working Air Pressure | 80-120 PSi (5.52-8.27 bar, adjustable) |
| Max Air Pressure | ≤150 PSi (10.34 bar, automatic pressure relief) |
| Sandblast Nozzle Diameter | 6mm (tungsten steel material) |
| Abrasive Capacity | 500 mL (high-transparency PC hopper) |
| Feed Type | Pressure-fed (uniform sandblasting without interruption) |
| Air Inlet | G1/4" (standard universal interface) |
| Gun Weight | 780g (aluminum alloy material) |
- Tungsten Steel Nozzle: HRC90+ hardness with 800-hour service life (5* more durable than stainless steel)
- Precision Control: 6mm fixed diameter maintains 12-18cm sandblasting width with ≤0.5μm roughness deviation
- Adjustable Pressure: 80-120PSI range for both heavy rust removal (2.5N impact force) and fine texturing
- Efficient Design: 500mL hopper enables 15-20 minutes continuous operation (50% fewer refills)
- Safety Features: Pressure relief valve activates at 150PSI; 100-mesh anti-clogging filter
- Abrasive Preparation: Use 80-120 mesh abrasives (quartz sand/glass beads), fill hopper to 80% capacity (~400mL)
- Pressure Adjustment: Connect to ≥0.5m³/min compressor; set 100-120PSI for rust removal, 80-90PSI for texturing
- Sandblasting Technique: Maintain 15-25cm distance at 45°-60° angle; move at 20-30cm/s with 30% overlap
- Maintenance: Clean nozzle/hopper with compressed air after use; store in dry environment
| Task | YD32-010 | Traditional Guns |
|---|---|---|
| 150cm² rust removal | 1 minute | 2 minutes |
| Car chassis rust removal | 1.5 hours | 3 hours |
| Abrasive utilization | 70%+ | 50% |
| Nozzle lifespan | 800 hours | 200 hours |
Process: 120PSI, 80-mesh quartz sand → 200cm² parts in 2 minutes each → 98% rust removal rate
Process: 100PSI (chassis) + 90PSI (wheels) → 1.5 hours/car (vs. 3 hours traditionally)
Process: 80PSI, 120-mesh glass beads → Ra2.0μm uniform texture → 100 badges in 2 hours
- Dry/sieve moist abrasives (60℃ for 30 minutes)
- Check hopper seal (tighten lid, replace rubber ring)
- Reduce pressure to 80-90PSI for soft materials
- Switch to 100-120 mesh fine abrasives
Product Highlights
YD32-010 Sandblast Gun: 6mm Tungsten Nozzle, 80-120PSI, 500mL Hopper Core Specifications Parameter Category Specific Specification Model No. YD32-010 Product Type Universal Pneumatic Sandblast Gun (dry sandblasting operations) Working Air Pressure 80-120 PSi (5.52-8.27 bar, adjustable) Max Air ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
