Pneumatic Cleaning Guns: Foam/Pulse/Jet, 1L Tank for Car/Factory/Home Cleaning
Product Details
| Model No.: | YD32-017 | Product Type: | Multi-function Pneumatic Cleaning Gun (foam Spray + Air Blowing) |
|---|---|---|---|
| Inlet Interface: | 1/4" (G1/4" Standard Fitting, Compatible With Most Air Compressors) | Working Pressure: | 6.2 Bar / 90 PSi |
| Airflow Rate: | 120 NL/min | Pot Capacity: | 1L (high-transparency PC Material) |
| Highlight |
Pneumatic cleaning gun with 1L tank,Foam pulse jet cleaning gun,Car factory home cleaning gun |
||
Product Description
| Parameter Category | YD32-017 (Foam Interior Cleaning Gun) | YD32-018 (Pulse Rotation Cleaning Gun) | YD32-019 (High-Pressure Water Jet Cleaning Gun) |
|---|---|---|---|
| Model No. | YD32-017 | YD32-018 | YD32-019 |
| Product Type | Multi-function pneumatic cleaning gun (foam spray + air blowing) | Multi-function pneumatic cleaning gun (pulse rotation + cleaning) | Multi-function pneumatic cleaning gun (high-pressure water jet + cleaning) |
| Inlet Interface | 1/4" (G1/4" standard fitting, compatible with most air compressors) | ||
| Working Pressure | 6.2 bar / 90 PSi | ||
| Airflow Rate | 120 NL/min | ||
| Pot Capacity | 1L (high-transparency PC material) | 1L (chemical-resistant resin tank) | 1L (impact-resistant transparent tank) |
| Gun Body Material | Aluminum alloy (lightweight, impact-resistant) | ||
| Nozzle/Head Configuration | Copper bearing nozzle (rotatable) | 2 engineering plastic horn heads | Metal high-pressure nozzle (rust-resistant) |
| Function Modes | 1. Foam cleaning 2. Pneumatic air blowing |
1. Pulse Rotation 2. Normal Cleaning |
1. High-Pressure Water Jet 2. Wide Water Spray |
- Product Positioning: Designed for car cleaning, equipment maintenance, and scene cleaning applications
- Structure & Material: High-strength aluminum alloy body (≤600g), 1L corrosion-resistant tank, pure copper valve core (≥5000 cycles)
- Operation: Compatible with air compressors (≥0.3m³/min), suitable for various cleaning solutions
- 2-in-1 foam + air blowing functionality for complete interior cleaning
- Built-in foam generator produces 0.5-1mm fine foam for deep penetration
- 360° rotatable copper nozzle with adjustable 5-15cm spray width
- 1L transparent tank allows easy liquid level monitoring
- Pulse rotation at 1500 rpm doubles cleaning range
- Includes 2 horn heads (5cm/8cm) for different applications
- Lightweight 550g design with ergonomic trigger
- Balanced center of gravity for stable operation
- 1.5mm metal nozzle produces ≥1.5m high-pressure water jet
- Adjustable water flow between fine jet and wide spray
- Brass + chrome plated nozzle (IP54 rust protection)
- Built-in 100-mesh anti-clog filter for consistent performance
- YD32-017 for interior gap cleaning and drying
- YD32-018 for large-area interior surfaces
- YD32-019 for exterior and engine compartment cleaning
- Reduces cleaning time by 33% compared to traditional methods
- YD32-018 for dust removal from motors and heat sinks
- YD32-019 for oil stain removal from bearings
- Reduces maintenance costs by 40% and improves heat dissipation
- YD32-019 for tile and surface cleaning
- YD32-017 for glass cleaning and drying
- Increases cleaning efficiency by 60% compared to manual methods
- Adjust cleaner dilution to 1:10 ratio
- Ensure air compressor displacement ≥0.3m³/min
- Clean foam generator filter if clogged
- 60-70dB noise is normal during operation
- Check horn head installation for proper alignment
- Contact merchant for pulse valve replacement if noise increases suddenly
- Clear nozzle clogging with thin wire or water rinse
- Check hose connections for air leaks
- Verify air compressor maintains 90 PSi pressure
- Only suitable for small-area emergency use with intermittent operation
- For commercial applications, use ≥0.3m³/min air compressor
- Optimal performance requires ≥0.5m³/min for professional use
Product Highlights
Multi-Function Pneumatic Cleaning Guns: Foam/Pulse/Jet Models with 1L Tank Professional Cleaning Solutions for Automotive, Industrial and Household Applications Product Specifications Model Comparison Parameter Category YD32-017 (Foam Interior Cleaning Gun) YD32-018 (Pulse Rotation Cleaning Gun) ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.