YD33-012 Heavy-Duty Aluminum Alloy Checker Plate Tool Box
Industrial-grade 2.0mm thick aluminum alloy tool box with 50kg load capacity, IP66 protection, and dual gas struts for mining, port, and factory applications.
Product Specifications
Core Parameters
| Parameter Category |
Specific Specification |
| Model No. |
YD33-012 |
| Product Type |
Extra-large industrial-grade heavy-duty tool box |
| Product Size |
1445mm (W) × 520mm (D) × 465mm (H) |
| Weight Parameters |
Net Weight: 21.5kg; Gross Weight: 23.5kg |
| Load-Bearing Capacity |
Internal: 50kg; Top: 80kg |
| Material |
6061-T6 aviation-grade aluminum alloy body/lid |
Structural Features
- 2.0mm thick high-strength aluminum alloy construction
- Checker plate surface (anti-slip, friction coefficient ≥0.9)
- Dual heavy-duty gas struts (single strut load-bearing ≥80N)
- 4 anti-pry metal latches (single latch force ≥40N)
- 4 recessed reinforced handles (single handle load-bearing ≥50kg)
- IP66 protection rating (dustproof and waterproof)
Product Advantages
1. Heavy-Duty Construction
- 6061-T6 aviation-grade aluminum alloy with 300MPa compressive strength
- 2m drop test certified (half-loaded, 25kg tools) with no deformation
- Hard anodized + ceramic coated surface (HV400 hardness)
2. Enhanced Functionality
- Dual gas struts for smooth opening/closing (15,000 cycle lifespan)
- 220L extra-large capacity (35% lighter than steel equivalents)
- 95° opening angle with automatic locking
3. Superior Protection
- IP66 rating with EPDM rubber seal (12mm width)
- Temperature resistant from -30℃ to 80℃
- Anti-pry latches with padlock compatibility
Application Scenarios
1. Mining Maintenance Stations
Stores hydraulic wrenches, large sockets, and spare parts with dust-proof and vibration-resistant capabilities.
2. Port Equipment Maintenance
Waterproof and salt spray-proof solution for crane maintenance tools and spare parts.
3. Factory Workshops
Large capacity for robot maintenance tools with oil-proof protection and efficient access.
Frequently Asked Questions
Q1: Gas strut makes hissing sound and loses support?
Solution: Check joints, replace seals, or install new gas struts if needed.
Q2: Rust spots in salt spray environment?
Solution: Sand affected area, apply rust inhibitor, and repair coating.
Q3: Adding internal partitions?
Solution: Use adjustable aluminum alloy partitions (1400×500mm) with spare part boxes.
Q4: Fitting in standard freight elevators?
Solution: Fits easily (1445×520×465mm) without disassembly when placed width-wise.
Your message must be between 20-3,000 characters!
