YD43-004 20Gal Electric Parts Washer: 5.28GPM, 4 Casters, for Auto/Agri/Hardware
Product Details
| Product Type: | Compact Multi-functional Cleaning Workbench | Main Material: | 14-gauge Thick Steel Plate |
|---|---|---|---|
| Size: | 27.5" × 16" (approx. 69.85cm × 40.64cm) | Leak-Proof Design: | 3/4" (approx. 1.91cm) High Rim |
| Surface Treatment: | Sandblasted With Oil-resistant Paint | Net Weight:: | 27kg |
| Highlight |
20-gallon electric parts washer,parts washer with 4 casters,auto parts washer 5.28GPM |
||
Product Description
| Parameter Category | Specific Specification |
|---|---|
| Model No. | YD43-004 (Industrial-grade electric parts washer, equipped with high-pressure spray system, fire safety structure, and flexible mobility device) |
| Product Type | Electric spray-type parts washer |
| Basic Parameters |
|
| Core Configuration |
|
| Safety & Auxiliary Structure |
|
| Mobility & Electrical |
|
| Test Item | Test Condition | Test Result |
|---|---|---|
| Spray Pressure Stability | Continuous operation for 1 hour | Stable pressure at 0.3-0.32MPa with no fluctuation |
| Fire Safety | 120℃ high temperature simulation | Fusible link disconnects within 30 seconds, lid closes automatically |
| Caster Durability | 100m movement with full load | No jamming or wear, stable when locked |
| Solvent Compatibility | 24-hour continuous soaking | No corrosion or deformation observed |
- High-pressure spray without blind spots: 5.28GPM flow rate penetrates small oil passages
- 360° flexible nozzle: Adjustable angle and length for thorough cleaning
- 20-gallon large tank: Handles medium/large parts like engine cylinder heads
- Grid tray filtration: Reduces pump failure rate to below 5%
- Fire protection structure: Fusible linked lid arm (melts at 70℃) automatically closes lid
- Sealed hinged lid: Reduces solvent evaporation by 80%
- Water-based solvent only: Biodegradable with lower waste treatment costs
- Drain plug design: Enables quick waste disposal without dumping unit
- 4-wheel mobility: 2 fixed + 2 lockable swivel casters for easy repositioning
- Removable drying shelf: Allows solvent drainage and easy cleaning
- Split assembly design: Compact storage in small workspaces
- Two-person assembly in 25 minutes
- High-pressure spray cleaning of cylinder heads (40 minutes vs 2 hours manually)
- Drying shelf for solvent drainage
- Result: 50-minute time savings per cleaning, 25% increase in customer repurchase rate
- 240V version for factory power compatibility
- Mobile operation in field maintenance scenarios
- Result: 30% increase in tractor operation efficiency, 15 yuan cost reduction per cleaning
- Compact storage against walls when not in use
- Low-pressure wide-range mode for delicate mold patterns
- Result: Product qualification rate increased from 92% to 99%
- Check solvent level (minimum 1/3 tank height)
- Clean pump and nozzle for blockages
- Verify correct voltage supply
- Check for nearby high-temperature sources
- Replace fusible link (cannot be reused)
- Preventative maintenance every 3 months
- Size ≤ 28*19*8.2 inches, weight ≤20kg
- Metal parts only (no plastic/rubber)
- Oil stains, iron filings, or mild rust only
- Clean tray and filter screen weekly
- Add water-based solvent synergist
- Replace when transparency <50% or cleaning effectiveness drops
Product Highlights
YD43-004 20Gal Electric Parts Washer: 5.28GPM, 4 Casters, for Auto/Agri/Hardware Product Specifications Core Parameter Summary Parameter Category Specific Specification Model No. YD43-004 (Industrial-grade electric parts washer, equipped with high-pressure spray system, fire safety structure, and ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
