YD43-007 40Gal Dual-Tank Washer: 5.28GPM Dual Pumps, for Auto/Agri/Construction
Product Details
| Packaging Specification: | 1 Unit/carton (thick Plywood Wooden Box + EPE Foam Cushioning) | Weight:: | Gross Weight 45kg, Net Weight 42kg |
|---|---|---|---|
| Overall Dimension:: | 114×55×33cm (L×W×H) | Container Loading Capacity: | 145 Units In 20-foot Container, 290 Units In 40-foot Container |
| Tank Design: | Two Separated Sealed Tanks (Total Capacity 40 Gallons) | Solvent Capacity Range: | Max. 24 Gallons, Min. 12 Gallons |
| Highlight |
40Gal dual-tank washer for auto,5.28GPM dual pumps washer,washer for agri construction |
||
Product Description
| Parameter Category | Specific Specification |
|---|---|
| Model No. | YD43-007 (Industrial-grade dual-tank large parts washer) |
| Product Type | Electric dual-tank parts washer |
| Basic Parameters |
|
| Core Configuration of Cleaning System |
|
| Safety Structure |
|
| Applicable Scenarios |
|
| Test Item | Test Condition | Test Result |
|---|---|---|
| Dual-Pump Spray Stability | Operate dual pumps simultaneously for 2 hours | Spray pressure stable at 0.32-0.35MPa with no fluctuation |
| Fire Safety | Simulate high temperature of 130℃ | Fusible link breaks within 25 seconds, lids close simultaneously |
| Leak-Proof Performance | Fill both tanks for 48 hours | No leakage from the tanks, meeting leak-proof standards |
| Effectiveness of Overload Protection | Simulate an overload scenario | Motor powers off automatically within 3 seconds |
- Dual-Tank Partitioning: Different functional solvents can be injected separately (degreaser in left tank, rust inhibitor in right tank)
- Dual-Pump High-Pressure Spray: Total flow rate reaches 10.56 gallons/minute, spray pressure penetrates deep holes and gaps
- Adjustable Spray Rods: Maximum length of 60cm, 360° rotatable nozzles
- Fusible Link Fire-Proof Lids: Automatically close at high temperature to block oxygen
- Motor Overload Protection: Automatically powers off when current exceeds rated value
- Welded Sealing Technology: No gaps at joints, solvent leakage ≤5ml/24h
- Thickened Material: 2.5mm thick cold-rolled steel plate with three layers of oil-resistant paint
- Parts Baskets: For storing small parts (capacity 10L each)
- Bottom Anti-Slip Pads: 5mm thick rubber (friction coefficient ≥0.8)
- Dual-Voltage Compatibility: 110V/240V versions available
- Inclined Tank Bottom Design: Easy sediment discharge without dumping
- Complete "cleaning-rust prevention" process within 3 hours
- Saves 2 hours compared to traditional single-tank method
- Oil stains and carbon deposits completely removed
- Process 2 crankshafts within 4 hours
- Saves 2.5 hours compared to single-tank operation
- No solvent leakage or motor overload risk
- Complete cleaning within 2.5 hours
- No residual impurities in cylinder barrels
- Single cleaning cost 70% lower than outsourcing
- Check for pump blockage at liquid inlet
- Confirm overload protection status
- Check line connection for looseness
- Replace middle gasket if aging
- Control part liquid carrying capacity during transfer
- Perform regular solvent replacement
- Part length ≤114cm, width ≤55cm, height ≤30cm
- Single part weight ≤50kg
- Use only neutral/weakly alkaline solvents
- Clean nozzles after each use
- Perform weekly maintenance with ultrasonic cleaner
- Install high-precision filter screen at liquid inlets
Product Highlights
YD43-007 40Gal Dual-Tank Washer: 5.28GPM Dual Pumps, for Auto/Agri/Construction Product Specifications Core Parameter Summary Parameter Category Specific Specification Model No. YD43-007 (Industrial-grade dual-tank large parts washer) Product Type Electric dual-tank parts washer Basic Parameters ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
