YD44-008 18Gal Oil Drainer: 37-76" Height, Iron Hand Pump, 3" Casters, for Trucks/Agri/Machinery
Product Details
| Model: | YD44-008 | Product Type: | HDPE Heavy-duty Mobile Waste Oil Drainer With Iron Hand Pump |
|---|---|---|---|
| Outer Packing Size: | 48×44.5×77.5cm | Shipping Weight: | 12.5kg |
| Temperature Range: | -30℃-80℃ | Medium:: | Waste Vehicle Oil (collection Of Strong Acids, Alkalis, And Flammable/explosive Liquids Is Prohibited) |
| Highlight |
18-gallon oil drainer with hand pump,iron oil drainer for trucks and machinery,oil drainer with 3-inch casters |
||
Product Description
| Parameter Category | Specific Specification |
|---|---|
| Model | YD44-008 (Industrial-grade heavy-duty mobile oil drainer with hand pump, integrating 18-gallon extra-large capacity, 76-inch ultra-high adaptability, and fast oil drainage via iron hand pump) |
| Product Type | HDPE heavy-duty mobile waste oil drainer with iron hand pump |
| Basic Parameters |
|
- Oil Storage System: 18-gallon capacity (approx. 75L), 5mm thickened HDPE oil tank with 15L collection funnel
- Height Adjustment System: 37-76 inch adjustable range, aluminum alloy pipe with buckle-type locking
- Mobility System: 4x 3-inch heavy-duty casters with single load capacity ≥30kg
- Oil Drainage System: Iron hand pump with 120ml/stroke displacement, 3/4-inch dual-mode valve
- HDPE oil tank withstands 20kg vertical impact without cracking
- No obvious discoloration after 5 years of outdoor exposure
- Hand pump service life ≥12,000 presses
- Casters maintain performance after 500m movement with full 75L load
- 120ml/stroke displacement drains 75L waste oil in 10 minutes (4x faster than natural drainage)
- Cold-rolled steel pump body with double-layer anti-rust treatment
- 3/4-inch valve supports both fast pump drainage and natural gravity drainage modes
- Adjustable height range covers medium trucks to mining excavators
- Buckle-type locking ensures stable positioning even during equipment vibration
- 5mm thickened HDPE construction resists impact and extreme temperatures
- 30kg single caster load capacity handles complex terrain
- 18-gallon capacity collects oil from 3 heavy-duty trucks or 2 large tractors
- Clear tank markings with 5cm safety height prevent overflow
- Adapts to 190cm chassis height of mining excavators
- Hand pump operation requires no power supply
- 3-inch casters move smoothly on gravel roads
- Completes 60L oil change + drainage in 2 hours (saves 1.5 hours)
- 18-gallon capacity reduces drainage frequency during batch operations
- Operates in muddy field conditions without power supply
- Increases batch oil change efficiency by 50%
- Pure mechanical operation meets explosion-proof requirements
- No electrical components or spark risks
- Completes 3-truck oil change (66L) in 2.5 hours (saves 1 hour)
This is typically caused by impurity blockage or piston seal wear. Solution steps:
- Clean pump body with high-pressure water gun
- Replace piston sealing ring if needed
- Perform monthly lubrication and quarterly disassembly cleaning
- Install rubber anti-slip covers on casters
- Lay temporary wooden board or steel plate paths
- Maintain constant pushing speed without sudden stops
- Tighten connecting bolts
- Replace silicone sealing ring if needed
- Perform quarterly disassembly and cleaning
Designed for vehicle oil (viscosity ≤200cSt). For industrial gear oil:
- Not recommended for long-term use
- Conduct small-dose test first if necessary
- May cause pump jamming and accelerated wear
Product Highlights
YD44-008 18Gal Oil Drainer: 37-76" Height, Iron Hand Pump, 3" Casters, for Trucks/Agri/Machinery Product Specifications Parameter Category Specific Specification Model YD44-008 (Industrial-grade heavy-duty mobile oil drainer with hand pump, integrating 18-gallon extra-large capacity, 76-inch ultra...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
