YD44-017/017A Bidirectional Hand Oil Pump: 3.7L/min, Self-Priming, for Farms/Garages/Sites
Product Details
| Parameter Category: | YD44-017 | Dimension:: | 96×53×52cm |
|---|---|---|---|
| G.W./N.W: | 33kg/30kg | Applicable Medium: | Gasoline, Diesel, Oil |
| MOQ: | 50 Units | Pcs/ctn: | 1 Unit Per Carton |
| Highlight |
bidirectional hand oil pump 3.7L/min,self-priming oil pump for farms,motorcycle lift bench hand pump |
||
Product Description
| Parameter Category | YD44-017 (Main Unit) | YD44-017A (Accessory) |
|---|---|---|
| Model | Industrial-grade bidirectional hand oil pump, featuring compact structure, strong self-priming ability, and dual functions of oil suction and filling, suitable for transferring gasoline, diesel, and oil | Matching accessory for YD44-017, used to enhance the pump's adaptability to different oil transfer scenarios, lightweight and easy to store |
| Product Type | Bidirectional manual oil transfer pump, realizing "bidirectional oil suction & filling" through manual operation, no external power required | Accessory for bidirectional hand oil pump, compatible with YD44-017 main unit |
| Basic Parameters |
|
|
| Test Item | Test Condition | Test Result (YD44-017) | Test Result (YD44-017A) |
|---|---|---|---|
| Suction Speed | Transfer 50L diesel, manual operation at 23r/min | 50L diesel transferred in 13.5 minutes, average rate ~3.7L/min, no oil leakage | No independent speed test (depends on main unit) |
| Self-Priming Ability | Place the pump 1m above the oil barrel, start without pre-filling liquid | Starts oil suction within 30 seconds, stable suction with no air bubbles | Compatible with main unit; no interference with self-priming function |
Centered on bidirectional efficiency + low maintenance + wide adaptation, the YD44-017/YD44-017A Bidirectional Hand Oil Pump solves the pain points of traditional hand oil pumps.
- Free Switch Between Suction and Filling: Simply toggle the valve to switch between "suction" and "filling", saving 80% of switching time
- Stable High-Speed Transfer: Average oil transfer rate reaches ~3.7L/min, 2 times faster than ordinary hand pumps
- Strong Self-Priming: Starts suction within 30 seconds, even when the pump is 1m above the oil source
- Self-Lubrication: No need to add lubricating oil regularly
- High-Strength Material: Cast iron housing withstands 10kg vertical impact without deformation
- Leak-Proof Design: Leakage rate ≤0.1ml/24h
Two farm workers carry YD44-017 to the field, place it 0.5m away from the 200L diesel barrel, connect the hose
Rotate the handle at 23r/min, with a transfer rate of ~3.7L/min. Each tractor is refueled with 40L diesel in 10.8 minutes
Install YD44-017A accessory on YD44-017's NPT3/4 port, convert to small-diameter hose
Extract 2L old oil from each generator in 35 seconds, store temporarily in the accessory's 1L container
Solution:
- Check hoses and ports for blockages
- Inspect seals for wear
- Eliminate air leaks
Answer: No, it is only suitable for transferring gasoline, diesel, and oil due to material incompatibility and safety risks.
Product Highlights
YD44-017/017A Bidirectional Hand Oil Pump: 3.7L/min, Self-Priming, for Farms/Garages/Sites Product Specifications Core Parameter Summary Table (Including Two Models Comparison) Parameter Category YD44-017 (Main Unit) YD44-017A (Accessory) Model Industrial-grade bidirectional hand oil pump, featuring ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
