YD13-017 2 Ton Capacity Under Hoist Stand
Professional-grade support device designed for stabilizing and supporting medium-heavy vehicles during hoisting operations. Must be used in pairs for optimal safety.
Product Specifications
| Parameter Category |
Specific Value |
| Product Name |
YD13-017 2 Ton Capacity Under Hoist Stand |
| Model No. |
YD13-017 |
| Intended Use |
Stabilizing and supporting vehicles lifted by in-ground or above-ground lifts (must be used in pairs) |
| Load Capacity |
2 tons (suitable for medium-heavy vehicles) |
| Height Adjustment |
6-position height-locking pin + quick-adjust spin handle with thrust bearing |
| Threaded Screw |
1" diameter acme threaded screw with 6-1/2" (165.1mm) travel |
| Anti-Slip Design |
5/8" thick rubber saddle pad |
| Height Range |
48.875" (1241.4mm) to 85.375" (2168.5mm) |
| Base Size |
12"*12"*12" (304.8mm cube) |
| Weight |
Net: 21kg, Gross: 22kg |
Key Features
- Heavy-Duty Construction: 2-ton capacity with Q235 carbon steel support column (5mm wall thickness) and 4mm-thick cold-rolled steel base
- Dual Adjustment System: 6-position quick-locking pin + 1" acme threaded screw for precise fine adjustment (±0.3mm accuracy)
- Enhanced Safety: Cubic base design increases anti-tip-over capability by 60% compared to round bases
- Vehicle Protection: 5/8" thick natural rubber saddle pad (Shore hardness 60±5) prevents chassis damage
- Labor-Saving Operation: Spin handle with thrust bearing requires ≤35N force even under full load
Technical Advantages
1. Stable Support for Medium-Heavy Vehicles
The 2-ton rated load easily supports vehicles like Mercedes-Benz E-Class (1.8 tons) and Haval H6 SUV (1.6 tons). The cubic base provides 144 square inches of ground contact area, increasing stability by 60% compared to round bases.
2. Efficient Height Adjustment
Six positioning holes allow quick height locking between 48.875" and 85.375". The 1" acme threaded screw enables precise fine adjustment (±0.3mm accuracy) for perfect chassis alignment.
3. Durable Construction
Support column made of Q235 carbon steel (5mm wall thickness) withstands heavy loads without bending. Chrome-plated 45# steel screw has tensile strength ≥900MPa and wear coefficient ≥4.0.
Application Scenarios
Auto 4S Shops
Ideal for supporting medium-heavy sedans (e.g., Mercedes-Benz E-Class) during gearbox overhauls or major repairs.
Auto Repair Shops
Perfect for SUV suspension work (e.g., Haval H6), providing stable support during component replacement.
Modification Shops
Essential for chassis modifications on vehicles like Toyota Land Cruiser, ensuring precise alignment during upgrades.
Agricultural Service
Suitable for tractor maintenance (e.g., Dongfanghong tractors up to 1.9 tons) in field service conditions.
Frequently Asked Questions
Q: Can this stand support a 2.2-ton tractor?
A: No, this exceeds the 2-ton rated load. For 2.2-ton vehicles, a 3-ton capacity stand should be used to ensure safety.
Q: How difficult is it to adjust the height under load?
A: The thrust-bearing handle requires ≤35N of force even at full load, making adjustments easy for most operators.
Q: How often should the rubber saddle pad be replaced?
A: We recommend replacement every 2 years or when visible cracking occurs to maintain optimal anti-slip performance.
Your message must be between 20-3,000 characters!
