Heavy Duty Drum Pump 34L/Min 925mm Suction For Workshops / Farms / Sites
Product Details
| Highlight |
heavy duty drum pump 34L/min,925mm suction drum pump,workshop drum pump |
||
|---|---|---|---|
Product Description
| Parameter Category | Specific Specification |
|---|---|
| Model | YD51-004C (Heavy-duty manual drum pump, engineered for high-volume liquid transfer from 200-gallon drums in industrial workshops, large farms, construction sites, and commercial storage facilities) |
| Product Type | 200-gallon drum-compatible heavy-duty manual pump, integrating "high-flow performance + rugged chrome-plated steel + deep suction" to handle large-scale liquid transfer tasks |
| Basic Parameters |
|
| Test Item | Test Condition | Test Result |
|---|---|---|
| High-Flow Stability | Operate at 40 strokes/min to transfer diesel from a 200-gal drum for 2 hours | Flow rate remains steady at 34 L/min (850 cc/stroke × 40 strokes/min); no pressure drop or flow fluctuation |
| Leak-Proof Performance | Fill the pump with hydraulic oil (viscosity 46 cSt), operate for 1 hour at max flow | Nitrile seal ring maintains a tight seal; no leakage at adaptor, piston, or pipe joints; 100% liquid retention |
| Durability | Perform 15,000 consecutive strokes (simulate 1 month of heavy use) with 34 L/min flow | Chrome-plated pipe no bending; PP piston no wear; reinforced adaptor thread no stripping; pump functions normally |
| Suction Efficiency | Test suction from a 200-gal drum with 5L residual oil at the bottom | 925mm suction head extracts 4.8L of residual oil (96% extraction rate); minimal waste |
The YD51-004C Heavy-Duty Manual Drum Pump addresses the limitations of lightweight pumps: "slow flow, shallow suction, and fragile build". With 34 L/min high flow + 925mm deep suction + rugged chrome steel as core strengths, it is built for large-scale 200-gallon drum transfer tasks.
- 34 L/min Rapid Transfer: The 850 cc per stroke flow rate and 40 strokes per minute speed enable transferring 34L of liquid per minute - enough to empty a 200-gallon drum (≈757L) in just 22 minutes.
- Wide Inlet/Outlet Design: The φ38.6mm inlet and φ19mm outlet work together to minimize flow resistance.
- Thickened Chrome-Plated Steel Pipe: Resists rust and scratches while withstanding accidental impacts.
- Reinforced Nitrile Seal: Thicker than standard seals (2mm vs. 1mm), ensuring it can handle high-flow pressure without leaking.
- Sturdy PP Piston: Designed to withstand the pressure of 850 cc per stroke while moving smoothly.
- 925mm Extra-Long Suction Head: Reaches the bottom of tall 200-gallon drums, extracting 96% of the liquid.
- 2" G-Thread Reinforced Adaptor: Features reinforced threads that lock securely into standard drum bungs.
Scenario Requirement: A manufacturing workshop transfers 500L of hydraulic oil daily from 200-gallon drums to 10 pieces of machinery (50L each).
- Installation: 2 workers attach YD51-004C to the drum (2 minutes)
- Transfer: Operate the pump at 40 strokes/min - 50L hydraulic oil transferred per machine in ~1.5 minutes
- Efficiency: 10 machines serviced in 15 minutes
Scenario Requirement: A farm with 20 tractors (each needing 100L diesel per day) uses 200-gallon drums of diesel.
- Setup: Install YD51-004C on the diesel drum
- Refueling: Transfer 100L diesel per tractor in ~3 minutes
- Convenience: The 925mm suction head empties the drum completely
Scenario Requirement: A construction site has 5 large generators (each needing 200L gasoline weekly) and uses 200-gallon drums of gasoline.
- Mobility: 2 workers carry the 2kg pump to the gasoline drum
- Fueling: Operate the pump to transfer 200L gasoline per generator in ~5.9 minutes
- Safety: The nitrile seal prevents gasoline leakage
A1: High viscosity increases flow resistance - solutions:
- Warm the Oil: Heat the hydraulic oil to 40-50℃ to reduce viscosity
- Adjust Stroke Speed: Increase strokes to 45 per minute
- Clean the Inlet: Check the φ38.6mm inlet for debris
A2: Yes, but verify the drum's bung size and height first.
A3: Heavy handles are due to friction or improper alignment - fixes:
- Lubricate the Piston: Apply a small amount of the liquid being transferred
- Check Pipe Alignment: Ensure the main pipe is straight
A4: Yes, but take extra safety precautions:
- Secure the Drum: Use drum chocks to keep the 200-gallon drum stable
- Use a Splash Guard: Attach a plastic splash guard to the φ19mm outlet
Product Highlights
YD51-004C Heavy-Duty Drum Pump: 34L/min, 925mm Suction, for Workshops/Farms/SitesProduct SpecificationsCore ParametersParameter CategorySpecific SpecificationModelYD51-004C (Heavy-duty manual drum pump, engineered for high-volume liquid transfer from 200-gallon drums in industrial workshops, large ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
