YD51-005A Adblue Hand Pump: 21L/min, Chem-Resistant, for Shops/Labs/Farms
Product Details
| Highlight |
Adblue hand pump 21L/min,Chem-resistant Adblue pump,Adblue pump for shops labs farms |
||
|---|---|---|---|
Product Description
| Parameter Category | Specific Specification |
|---|---|
| Model | YD51-005A (Chemical-resistant hand rotary drum pump, specialized for Adblue and multi-liquid transfer, designed for automotive workshops, chemical facilities, agricultural farms, and food-processing auxiliary areas) |
| Product Type | Multi-compatible hand rotary drum pump, integrating "high chemical resistance + self-priming function + multi-drum adaptation" to handle corrosive, volatile, and general liquids |
| Basic Parameters |
|
| Test Item | Test Condition | Test Result |
|---|---|---|
| Chemical Resistance | Soak key components (PP body, Viton seal, PPS vane) in 10% sulfuric acid (acid), 20% sodium hydroxide (alkali), and Adblue for 96 hours | No deformation, discoloration, or swelling; components maintain original performance |
| Self-Priming & Flow Stability | Test self-priming from 3m suction head with Adblue, then run at 70 R/min for 2 hours | Self-primes in 15 seconds; flow rate remains steady at 21±1 L/min; no air leakage |
| Multi-Drum Adaptability | Use with 15-gal, 30-gal, and 200-gal drums (adjust PP tube length) to transfer diesel | Fits all drum sizes securely; suction head reaches bottom of each drum; 98% liquid extraction rate |
| Durability | Perform 12,000 rotary cycles (simulate 1 month of daily use) with Adblue | PP body no cracks; Viton seal no hardening; PPS vane no wear; pump operates smoothly |
- PP/PPS/Viton Material Trio: The pump's main body (PP) resists most acids, alkalis, and solvents; PPS vanes handle high temperatures and rigid use; Viton seals prevent leakage even with aggressive liquids like 10% sulfuric acid or Adblue. Unlike standard pumps that corrode within weeks of chemical use, this trio ensures a service life of 8+ years.
- Edible Liquid Compatibility: Food-grade PP material makes the pump safe for transferring edible liquids (e.g., cooking oil, alcohol for food processing) - no toxic leaching, meeting food safety standards (e.g., FDA compliance for PP).
- 21 L/min Self-Priming Transfer: The self-priming design eliminates the need to pre-fill the pump with liquid, saving 5 minutes of setup time per drum. At 21 L/min, it empties a 200-gal Adblue drum in ~36 minutes - 30% faster than non-self-priming chemical pumps.
- Comfortable 70 R/min Speed: The optimized rotation speed balances efficiency and operator comfort. An operator can maintain 70 R/min for 1 hour without fatigue, making it suitable for batch transfers (e.g., 5×200-gal drums of Adblue in a single shift).
- 3-Piece Adjustable PP Tubes: The included 3 PP tubes (38mm length each) can be combined or used individually to fit 15-gal (short tube), 30-gal (2 tubes), and 200-gal (3 tubes) drums. This eliminates the need to purchase separate pumps for different drum sizes, cutting equipment costs by 60%.
- 1"/2" Dual Adapters: The 2-inch main adapter and included 1-inch bung adapter fit most industrial drum bungs. The adapters screw securely into drums, preventing slipping even when transferring volatile liquids like toluene.
Scenario Requirement: A truck repair workshop refuels 15 heavy-duty trucks (each needing 30L Adblue) daily from 200-gal Adblue drums. The workshop needs a pump that resists Adblue's corrosive properties.
Operation Process:
- Setup: Attach YD51-005A to the 200-gal drum (use 3 PP tubes), connect the 1-inch adapter to the truck's Adblue tank inlet
- Transfer: Rotate the pump at 70 R/min - 30L Adblue transferred per truck in ~1.4 minutes
- Efficiency: 15 trucks refueled in 21 minutes; self-priming design skips pre-filling steps
- Safety: Viton seals prevent Adblue leakage; PP material no corrosion after daily use
Effect: Chemical resistance suits Adblue; high flow saves time; multi-drum design fits workshop drums.
Scenario Requirement: A laboratory transfers 50L of dilute sulfuric acid (10%) weekly from 30-gal drums to small storage bottles. The lab needs a pump that won't react with acids.
Operation Process:
- Safety Prep: Use YD51-005A's PP/PPS/Viton components (non-reactive with sulfuric acid)
- Transfer: Adjust to 2 PP tubes for 30-gal drums, transfer 50L acid in ~2.4 minutes
- Precision: The 25mm outlet controls flow to avoid splashing; self-priming prevents acid contact with operators
- Cleanup: Disassemble PP tubes and rinse with water; no acid residue remains
Effect: Acid resistance ensures safety; precise flow reduces waste; easy cleaning fits lab standards.
Scenario Requirement: A farm transfers 100L diesel (for tractors) and 80L dilute fertilizer solution (alkaline) weekly from 15-gal and 200-gal drums. The farm needs a versatile pump.
Operation Process:
- Diesel Transfer: Use 1 PP tube for 15-gal diesel drums - 100L transferred in ~4.8 minutes
- Fertilizer Transfer: Switch to 3 PP tubes for 200-gal fertilizer drums - 80L transferred in ~3.8 minutes
- Versatility: No need to change pumps; PP material resists both diesel and alkaline fertilizer
- Outdoor Use: The pump's rust-resistant build withstands farm humidity; operates normally in 0-40℃
Effect: Multi-liquid compatibility saves cost; multi-drum fit adapts to farm needs; durable for outdoor use.
A1: Stiff rotation is due to increased liquid resistance - solutions:
- Warm the Liquid: Heat high-viscosity liquids to 30-40℃ (e.g., use a drum heater) to reduce thickness
- Lubricate the Vane: Apply a small amount of the liquid (e.g., oil) to the PPS vane - this reduces friction with the PP body
- Check for Debris: Inspect the 27mm inlet for solid particles (common in thick oils) and remove them with a soft brush
These steps restore smooth rotation.
A2: No. While the pump resists dilute acids/alkalis (≤20% concentration), concentrated acids/alkalis (≥50%) will corrode PP and PPS over time. For example, 98% sulfuric acid reacts with PP, causing material breakdown and leakage. Always check the liquid's concentration and compatibility with PP/PPS before use - contact the manufacturer for a compatibility list if unsure.
A3: Self-priming failure is usually due to air leaks or incorrect tube installation. Fixes:
- Check Seals & Adapters: Ensure the Viton seal is intact and the drum adapter is tightly screwed (air leaks break the vacuum)
- Verify Tube Length: The suction tube must reach the liquid surface - if too short, it draws air instead of liquid
- Prime Manually (Temporary): Pour a small amount of liquid into the pump inlet to help create vacuum; the self-priming function will take over afterward
A4: Cross-contamination is prevented with thorough cleaning:
- Rinse with Neutralizer: After acidic/alkaline liquids, rinse the pump and tubes with a neutral solution (e.g., baking soda water for acids, dilute vinegar for alkalis)
- Flush with Water: Rinse again with clean water to remove neutralizer residue
- Air-Dry: Disassemble PP tubes and let all parts air-dry completely before storing. For edible liquids, sanitize with food-grade disinfectant after cleaning
Product Highlights
YD51-005A Adblue Hand Pump: 21L/min, Chem-Resistant, for Shops/Labs/Farms Product Specifications Core Parameter Summary Parameter Category Specific Specification Model YD51-005A (Chemical-resistant hand rotary drum pump, specialized for Adblue and multi-liquid transfer, designed for automotive ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
