YEEDA YD51 Pneumatic Oil Pumps:14-18L/Min,SAE80-240,for Workshops/Farms/Factories
Product Details
| Model (with Suction Tube Length): | YD51-009 (270mm/730mm/940mm/1250mm) | Compression Ratio: | 1:0 |
|---|---|---|---|
| Air Inlet Connection: | F1/4"G | Oil Outlet Connection: | M1/2"G |
| Working Pressure: | 8 Bar | Air Consumption: | 100 L/Min. |
| Highlight |
Pneumatic oil pump for workshops,High-flow oil pump SAE80-240,Industrial oil pump 14-18L/Min |
||
Product Description
| Model (with Suction Tube Length) | Compression Ratio | Air Inlet Connection | Oil Outlet Connection | Working Pressure | Max. Flow Pressure | Air Consumption | Relative Capacity | Suction Tube Diameter | Key Features |
|---|---|---|---|---|---|---|---|---|---|
| YD51-009 (270mm/730mm/940mm/1250mm) | 1:0 | F1/4"G | M1/2"G | 8 Bar | 8 Bar | 100 L/Min. | 18 L/Min. | 42mm | Air-operated; smart low-part design; adjustable 2" bung adapter; suits SAE80 oil |
| YD51-010 (270mm/730mm/940mm/1250mm) | 3:0 | F1/4"G | M1/2"G | 8 Bar | 24 Bar | 100 L/Min. | 18 L/Min. | 42mm | Double Action; Self-Priming; fast/precise flow; suits SAE130 oil; 2" bung adapter |
| YD51-011 (270mm/730mm/940mm/1250mm) | 5:1 | F1/2"G | F3/4"G | 8 Bar | 40 Bar | 125 L/Min. | 14 L/Min. | 42mm | Double Action; Self-Priming; high viscosity compatibility; suits SAE240 oil; 2" bung adapter |
| Model | Suitable Oil Types (Viscosity Range) | Ideal Transfer Distance | Target Industries |
|---|---|---|---|
| YD51-009 | Motor oil, synthetic oil, hydraulic oil, gear oil, automatic transmission fluid (up to SAE80) | Short to medium distance | Automotive workshops, small-scale manufacturing |
| YD51-010 | Same as YD51-009 (up to SAE130) | Short to medium distance | Heavy machinery maintenance, agricultural equipment service |
| YD51-011 | Same as YD51-009 (up to SAE240) | Short to medium distance | Industrial gearboxes, high-viscosity oil transfer in factories |
The YEEDA YD51-009/010/011 Vertical Pneumatic Oil Pump Series addresses the pain points of high-viscosity oil transfer: "unsmooth pumping, high wear, and limited viscosity adaptability". With "air-operated efficiency + double-action design + viscosity-specific compatibility" as core strengths, each model targets distinct user needs:
- Low-Maintenance Smart Design: Fewer parts reduce wear and tear, cutting maintenance frequency by 40% compared to traditional pneumatic pumps. The adjustable 2" bung adapter fits most standard drums, eliminating the need for custom fittings.
- Stable Differential Air Motor: Ensures consistent pumping even for SAE80 oil, avoiding "stuttering" common in low-pressure pumps. Its 18 L/Min relative capacity meets daily needs of small workshops.
- Double Action & Self-Priming: Delivers fast, precise flow rates--30% faster than single-action pumps. The self-priming function skips pre-filling, saving 5 minutes of setup time per drum.
- SAE130 Compatibility: Handles medium-to-high viscosity oils (e.g., heavy gear oil), making it ideal for heavy machinery like tractors or excavators. The 24 Bar max flow pressure supports vertical transfer to small tanks.
- 5:1 Compression Ratio: Delivers 40 Bar max flow pressure, enabling smooth transfer of SAE240 high-viscosity oil (e.g., industrial gearbox oil) that clogs standard pumps.
- Enhanced Air & Oil Connections: F1/2"G air inlet and F3/4"G oil outlet improve flow efficiency; 125 L/Min air consumption ensures consistent power for long-duration use in factories.
Scenario Requirement: A car repair shop changes oil for 20 cars daily (each needing 4L SAE50 motor oil) from 200L drums. The shop needs a low-maintenance pump.
Operation Process:
- Setup: Attach YD51-009 (730mm suction tube) to a 200L drum via the 2" adapter; connect F1/4"G air inlet to the shop's air compressor;
- Transfer: Pump 4L oil per car in ~13 seconds (18 L/Min capacity);
- Efficiency: 20 cars serviced in ~4.3 minutes; smart low-part design reduces monthly maintenance to 1 time;
- Compatibility: Handles SAE50 oil easily; adjustable adapter fits all shop drums.
Effect: Low maintenance saves time; stable flow meets daily workshop needs.
Scenario Requirement: A farm services 8 tractors (each needing 15L SAE120 gear oil) weekly. The farm uses medium-distance transfer (5m) and needs fast pumping.
Operation Process:
- Setup: Use YD51-010 (940mm tube) with 2" adapter; connect air inlet to a portable compressor;
- Transfer: Double-action design delivers 15L oil in ~50 seconds; self-priming skips pre-filling;
- Durability: 24 Bar max pressure handles 5m transfer; no wear after 8 weekly refuels;
- Convenience: Lightweight design allows 1-person operation.
Effect: Fast flow saves labor; SAE120 compatibility fits tractor needs.
Scenario Requirement: A manufacturing plant refuels 10 industrial gearboxes (each needing 20L SAE220 oil) monthly. The oil has high viscosity, requiring powerful pumping.
Operation Process:
- Setup: Deploy YD51-011 (1250mm tube) for deep drums; connect F1/2"G air inlet to factory air supply;
- Transfer: 5:1 compression ratio pumps 20L SAE220 oil in ~1.2 minutes (14 L/Min capacity);
- Safety: 40 Bar max pressure ensures smooth flow without clogging; F3/4"G outlet prevents oil leakage;
- Reliability: Handles SAE220 oil without performance drop; monthly use shows no part wear.
Effect: High viscosity compatibility solves factory pain points; powerful pressure enables stable transfer.
A1: Slow flow for high-viscosity oil is usually due to insufficient air pressure. Solutions:
- Check Air Pressure: Ensure the air compressor provides 8 Bar working pressure (low pressure reduces flow);
- Clean Suction Tube: Remove the 42mm tube and flush with diesel to clear oil residue;
- Adjust Adapter: Ensure the 2" bung adapter is tightly sealed--air leaks reduce pump power. These steps restore 18 L/Min flow.
A2: No. Exceeding the SAE130 limit will strain the pump's 3:0 compression ratio, causing:
- Reduced Flow: The pump may only deliver 10-12 L/Min (40% lower than rated);
- Increased Wear: High viscosity forces parts to work harder, shortening service life by 50%;
- Clogging Risk: Thick oil may block the M1/2"G outlet. For SAE140+, use YD51-011 (SAE240 compatible).
A3: Self-priming failure is typically due to air gaps or oil residue. Fixes:
- Inspect Connections: Ensure the air inlet (F1/2"G) and oil outlet (F3/4"G) are tightly connected--air gaps break the vacuum;
- Prime Manually: Pour 200ml of low-viscosity oil (e.g., SAE30) into the suction tube to initiate vacuum;
- Clean Valves: Disassemble the double-action valves and wipe oil residue--gummed residue prevents self-priming.
A4: Base the choice on oil viscosity and needs:
- YD51-009: For SAE80 or lower (e.g., automotive motor oil) in small workshops--prioritizes low maintenance;
- YD51-010: For SAE130 or lower (e.g., tractor gear oil) in farms/medium shops--needs fast double-action flow;
- YD51-011: For SAE240 or lower (e.g., industrial gearbox oil) in factories--requires high viscosity compatibility. All models fit short-to-medium transfer distances.
Product Highlights
YEEDA YD51 Pneumatic Oil Pumps: 14-18L/Min, SAE80-240, for Workshops/Farms/Factories Product Specifications Core Parameter Summary Table Model (with Suction Tube Length) Compression Ratio Air Inlet Connection Oil Outlet Connection Working Pressure Max. Flow Pressure Air Consumption Relative Capacity ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
