YEEDA YD52-009A-E Trolley Grease Kits:50:1,800g/Min,for Workshops/Sites/Plants
Product Details
| Length Options: | 410mm/480mm/730mm/940mm | Compression Ratio: | 50:1 (handles High-viscosity Grease Up To SAE240) |
|---|---|---|---|
| Connections: | Air Inlet (F1/4"G), Oil Out (M1/2"G) | Pressure Ratings: | Working Pressure (8 Bar), Max. Flow Pressure (400 Bar) |
| Performance: | Air Consumption (120 L/Min) | ||
| Highlight |
trolley grease kit for workshops,motorcycle lift bench grease kit,high-capacity grease kit 1800g/min |
||
Product Description
| Model | Drum Cover Diameter | Follower Plate Diameter | Key Compatibility |
|---|---|---|---|
| YD52-009A | - | -(base model, no additional drum cover/follower plate) | Fits standard 20-60kg drums with existing covers |
| YD52-009B | 280mm | 265mm | Fits 20-30kg small-diameter drums |
| YD52-009C | 350mm | 340mm | Fits 30-40kg medium-diameter drums |
| YD52-009D | 385mm | 370mm | Fits 40-50kg large-diameter drums |
| YD52-009E | 420mm | 410mm | Fits 50-60kg extra-large-diameter drums |
| Component Category | Specific Specification |
|---|---|
| Air-Operated Grease Pump |
|
| Dispensing Hose |
|
| Grease Gun |
|
| 20-60kg Drum Trolley |
|
The YEEDA YD52-009A-E Trolley-Mounted Grease Dispensing Kits solve the pain points of mobile grease dispensing: "drum size mismatch, limited mobility, and inefficient greasing". With 5 model drum compatibility + 50:1 high-pressure pump + zinc-plated trolley as core strengths, they deliver flexible, efficient greasing for diverse workplaces:
- 5 Drum Size Options: From YD52-009B (280mm cover for 20-30kg drums) to YD52-009E (420mm cover for 50-60kg drums), the series fits nearly all 20-60kg drum sizes. The follower plates (265mm-410mm) ensure tight sealing with drum interiors, preventing grease contamination and waste.
- Base Model Flexibility: YD52-009A (no extra cover/plate) works with existing standard drum covers, ideal for users who already have compatible drums.
- 50:1 Pump for Thick Grease: The 400 Bar max flow pressure pushes high-viscosity grease (up to SAE240) into narrow machinery gaps (e.g., bearing races, hydraulic joints). The 800g/Min capacity cuts greasing time by 30% vs. manual guns.
- 4m SAE 100R2AT Hose: The oil-resistant, high-pressure hose enables greasing from 4m away--no need to move the heavy trolley repeatedly. Its flexibility reaches hard-to-access points (e.g., under-carriage of construction vehicles).
- Zinc-Plated 20-60kg Trolley: The rust-resistant trolley rolls easily on wheels/casters, carrying both drum and pump. At 19kg, it's light enough for one person to maneuver, saving labor vs. carrying drums manually. Modular design allows compact storage when not in use.
- 4-Jaw Grease Gun: The triple swivel joint and 4-jaw coupler ensure easy attachment to machinery ports--no leakage during greasing. The rigid terminal reduces hand fatigue during long sessions (e.g., greasing a fleet of trucks).
Scenario Requirement: A car repair shop uses 25kg grease drums (280mm diameter) to lubricate 30 cars daily (each needing 150g engine grease). The shop needs a compact, mobile solution.
Operation Process:
- Setup: Secure a 25kg drum to YD52-009B's trolley; attach the 280mm drum cover and 265mm follower plate; connect the pump to the shop's air compressor (8 Bar)
- Greasing: Use the 4m hose and grease gun to lubricate each car--150g grease takes ~11 seconds (800g/Min); the 4-jaw coupler ensures no leakage
- Efficiency: 30 cars serviced in ~5.5 minutes; trolley moves easily between repair bays
- Compatibility: Follower plate seals tightly with the 25kg drum, no grease contamination
Effect: Small-drum compatibility fits workshop needs; mobile design optimizes workflow.
Scenario Requirement: A construction site uses 50kg grease drums (385mm diameter) to lubricate 8 excavators (each needing 4kg grease) weekly. The site requires high pressure for thick grease and outdoor durability.
Operation Process:
- Setup: Load YD52-009D's trolley with a 50kg drum; attach the 385mm cover and 370mm follower plate; connect to a portable air compressor
- Greasing: Use the 4m hose to reach excavator hydraulic joints; 50:1 pump pushes thick grease (SAE240) into components--4kg takes ~5 minutes per excavator
- Durability: Zinc-plated trolley resists outdoor rain/dust; 400 Bar hose withstands high pressure
- Mobility: Trolley rolls on gravel paths, no need for forklift assistance
Effect: High pressure handles thick grease; outdoor-friendly build ensures reliability.
Scenario Requirement: A factory uses 60kg grease drums (420mm diameter) to maintain 12 industrial machines (each needing 2kg grease) monthly. The plant needs efficient long-distance greasing.
Operation Process:
- Setup: Position YD52-009E near the machine area; attach the 420mm cover and 410mm follower plate; connect to the factory's air supply
- Greasing: Extend the 4m hose to each machine; 800g/Min capacity dispenses 2kg grease in ~2.5 minutes per machine
- Safety: Max flow pressure (400 Bar) ensures thorough lubrication without over-greasing; 4-jaw coupler prevents spills
- Storage: Modular trolley folds compactly when not in use, saving warehouse space
Effect: Long hose fits plant layouts; large-drum compatibility reduces refilling frequency.
A1: Leaks are usually due to size mismatch or improper installation. Solutions:
- Check Model Compatibility: Ensure the follower plate diameter matches the drum (e.g., YD52-009D's 370mm plate for 385mm drum)
- Install Correctly: Press the follower plate firmly into the drum to create a tight seal--avoid tilting, which leaves gaps
- Replace Worn Plates: If the plate's rubber seal is cracked, replace it with a manufacturer-supplied seal (worn seals cause leaks)
A2: No. The pump's 50:1 compression ratio is optimized for SAE240 or lower. Using SAE300+ grease will:
- Reduce flow rate to 400-500g/Min (50% lower than rated)
- Strain the pump's internal components, shortening service life by 50%
- Clog the 30mm suction tube or 1/4" hose. For SAE300+, use a kit with a 65:1 pump (e.g., YEEDA YD52-008 series)
A3: Coupler issues are due to dirt or size mismatch. Fixes:
- Clean the Coupler: Wipe the 4-jaw coupler with a cloth to remove grease/debris--buildup blocks attachment
- Check Port Size: The coupler fits standard machinery lubrication ports (M6-M12); if ports are non-standard, use a coupler adapter (available from the manufacturer)
- Adjust Coupler Pressure: Squeeze the gun's trigger slightly while attaching the coupler--this helps the jaws lock onto the port
A4:
- Trolley Maintenance: Wipe the zinc-plated frame with a dry cloth after use to remove grease; touch up scratches with zinc-rich paint to prevent rust; lubricate wheels/casters quarterly
- Pump Maintenance: Flush the pump with low-viscosity oil after use to clear residual grease; clean the 30mm suction tube monthly; add air tool oil to the pump's air inlet weekly to keep the motor running smoothly
- Storage: Empty the drum and hose before long-term storage; keep the kit in a dry, ventilated area to avoid humidity damage
Product Highlights
YEEDA YD52-009A-E Trolley Grease Kits:50:1,800g/Min,for Workshops/Sites/Plants Product Specifications Core Parameter Summary Table (Model-Specific Drum Accessories) Model Drum Cover Diameter Follower Plate Diameter Key Compatibility YD52-009A - -(base model, no additional drum cover/follower plate) ...
Car Lifting Saddle 0.5T 4 Casters Hydraulic Transmission Jack
0.5T(1,100lb) Low-Lift Hydraulic Transmission Jack Installing and removing car and light-truck transmissions/differentials is a cinch with this jack. It features a fully adjustable universal saddle, brackets and chain, as well as formed and welded steel-plate construction with 4 swivel casters. ...
One Stage 0.5 Ton 500kg Hydraulic Transmission Jack
Model No.: YD05-001 0.5 Ton One Stage Hydraulic Transmission Jack With Adaptor With this high-quality hydraulic jack from Yeeda, you can easily lift and lower transmissions or other heavy parts with little effort. The transmission jack is capable of lifting up to 0.5 tonnes. This practical tool is ...
1000lbs Scissor CE 1 Cylinder Hydraulic Motorcycle Lift Bench
Model No.:YD08-002 1000lbs(450kgs) Scissor Pneumatic/Hydraulic Motorcycle Lift Bench • The best choice when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance. • For same structure can also be 800LB capacity design so as to reduce cost. • For same ...
One Cylinder Heavy Duty CE 6000lb Mid-Rise electric pump Scissor Car Lift
6000lbs(2722kgs) Scissor Pneumatic/Hydraulic Car Lift Bench Feature: • 6,000-lb.(2722kgs) lifting capacity • Perfect for servicing light-duty trucks and cars • Portable motor cart serves as tow handle to easily move lift from bay to bay • Safety lock bar with multiple lock positions • Truck adapters ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
